As shown ALTO-CAB-3KWh is capable of:

• • 100% DOD if you like (discharge all the capacity, no hit on life)
  • ALTO module installation requires no:
    • technical experties
    • electrical knowledge
    • Wires, Nut and/or Bolts
    • Our patented Magnetic NoWire connectivity will take care of it all for you, just slide the ALTO modules into the ALTO-CAB
  • 1C CHG/DCHG (you may charge or discharge all 3KWh in 1 hour, not hit on life expectancy)
  • -30°C native CHG/DCHG, no heater required (Save on cost, energy and things that can break down the road)
  • -50°c storage, if you live up north, you may leave the batteries on site all winter and come back in spring, the system is ready for used
  • “<1% per Year” self discharge, compared to other batteries, 1% to 3% per month
  • 20,000 cycles @ 100% DOD, We shouldn’t even worry about cycles with our 25 year warranty,  however for your information  we comfortably expect 20,000+ of them at 100% DOD, would you please figure out how long that is…
  • One person install:
    • 50lb for the cabinet ( one or two people can carry it to its resting place
    • 18lb per batter module, carry one or two per person to the cabinet, 1, 2 or 3 trips
    • 10lb per DCDC converter if you chose the 48V version
    • Insert and you are done, (Literally 10 minutes of work (depending how far you had walk obviously and assuming the rest of your system is already installed)
  • Aluminum Case on the ALTO-Batteires and ALTO-DCDC, SS#304 on ALTO-CAB, ALTO-TOWER, ALTO-SERVER-19″
  • Hot Swap – Dead ALTO-500Wh-1c module? No worries! just take it out hot and swap it with a working one (less than one minute repair)
  • Certification:
    • UL1973-2018 C/US, UL1642
    • UN3480